Loctite 7649 accelerator anaerobic adhesive accelerator catalyst glue 1.75fl

Loctite7649 is a CFC-free, one-component solvent-based surfactant.

The activator is mainly used to improve the curing speed of all Le Tai anaerobic adhesives. It is especially suitable for blunt metal, inert surface or large bonding cracks. Activator 7649 can still be used under the condition that the curing temperature is lower than room temperature, especially it is recommended to be used under the condition of lower than 15 ℃. It is characterized by a long service life on parts. It is used to promote the curing speed of all Le Tai anaerobic adhesives, especially to ensure normal curing on inactive metal surfaces.

Specifications: 4.5fl.oz canned

uses: promote anaerobic Adhesive Curing

color: transparent, Green

viscosity (mpa.s):2

solvent: acetone

operation Time:<30 days

solvent volatilization Time: 30/70 seconds

product Introduction:

uses: 1. Activation of inactive surfaces;

2. Accelerate the curing speed so that fasteners can be quickly restored to use;

3. In the larger gap and deeper thread, the curing speed is accelerated;

4. Greatly improve the curing speed of cold parts;

5. Can be used as a detergent.

Can be selectively applied to the following material surfaces:

active surface: copper surface, bronze surface, iron surface, mild steel surface

must be applied to the following material surface:

inactive surface: aluminum surface, stainless steel surface, magnesium surface, zinc surface, black oxide surface, cadmium surface, titanium surface and others.