简体中文
Deutsch
CNY
EUR
Le Tai 263 glue is suitable for locking and sealing threaded fasteners. This product solidifies between metal sealing surfaces with copper and oxygen, which can prevent loosening or leakage caused by vibration or impact. 263 is suitable for heavy-duty applications, such as the assembly of engine box bolts, pump shell bolts and other high-strength fasteners, le Tai 263 has good curing performance and acts on active metals (such as brass and copper) and inert substrates at the same time, such as stainless steel and coating surface, material products are resistant to high temperature and grease. It can allow all kinds of slight surface pollution, such as cutting, lubrication, corrosion prevention and oil pollution contained in protective liquid.
Product Performance
le Tai 263 has the following characteristics
technology: acrylic acid
chemical Type: dimethacrylate
appearance (uncured): red liquid
fluorescence: with fluorescence
composition: single component-no mixing required
viscosity: low
curing Method: anaerobic adhesive
double curing: Accelerator
application: thread locking adhesive
strength: high strength
color: red;
viscosity (mPa.s):400/600;
average disassembly torque (N.m):10;
average failure moment (N.m):33;
temperature range (℃):-45~180;
curing speed steel @ 25℃:24 hours;
recommended accelerator: 7649/7471;
specific gravity: 1.05
product Use
le Tai 263-high-strength thread locking agent has excellent performance and is suitable for various metals. Even if no activator is used, it has excellent performance for active metals and inert substrates. Can be used on active surfaces such as iron, red copper,
brass, steel, etc. can also be used on inert surfaces: such as stainless steel, aluminum, gold-plated surfaces, etc. with 180°C heat resistance, enhancing the reliability of high temperature applications.
